Functions

The Functions / Values / Options:


(Depending on the engine, the functions vary)

  • Automatic / manual brightness control
  • Full graphic touch display with 65536 colors
  • Boat image changeable
  • OBD2-Blocking function (only unlockable via chosen code!)
  • Enable diagnostics (OBD2) via disabling-function of the DataDisplay
  • Color setup freely adjustable (for example, oil temperature red, yellow and green is displayed)
  • Torque Offset (if the real value should not match the ECU value)
  • Read / Delete ECU Errorcodes
  • Shiftlight (Display via image on the DataDisplay and / or indicator in the instrument cluster)
  • Max values (stored) - erasable
  • Save and start with the last page
  • Delete - R (F-Series suppress the catalyst warning)
  • Torque
  • Power
  • Speed (Synchronization via GPS This makes time measurements very accurate)
  • Water temperature
  • Oil temperature
  • Gearbox temperatur (For all vehicles with automatic or DKG - E-series and F-series!)
  • Battery voltage
  • Boost (Target-value)
  • Boost (Source-value)
  • Wastegate position (WGDC)
  • Charge air temperature (IAT)
  • Airmass
  • Ignition angle
  • Injection time
  • Lambda value
  • Railpressure
  • Fuelpressure
  • Exhaust temperature (calculated by ECU)
  • Oilpressure (F-Series or E-Serie (N55) or other with external sensor)
  • DPF differential pressure
  • Pressure befire DPF
  • Soot DPF
  • Oil ash DPF
  • Distance since the last successful regeneration DPF
  • time measurements 0-100 kmh / 0-60 mph(shows gearshift time - manual gearbox)
  • time measurements 100-200 kmh / 60-140 mph (shows gearshift time - manual gearbox)
  • time measurements 1/4 Mile (incl. display of average acceleration) (shows gearshift time - manual gearbox)
  • time measurements 1/2 Mile (incl. display of average acceleration) (shows gearshift time - manual gearbox)
  • time measurements 1/8 Mile (incl. display of average acceleration) (shows gearshift time - manual gearbox)
  • Freely selectable speed for time measurement
  • Laptimer (Display distance and time) (shows gearshift time - manual gearbox)
  • G-Force Longtitude / Latitude
  • Soundtuning on/off (F-Series function - switch off exhaust burble)
  • Active Sound Design on/off (F-Series function - Fake engine sound from speakers)
  • Exhaustflap control
  • Gauge sweep (needle sweep when ignition on)
  • Optional connectable sensors (Oil temperature, Oil pressure, Exhaust temperature, ...)
  • Dashboard with 8 freely selectable values (Water and Oil temperature always on top)
  • DSC / DTC switchable with the vehicle starting on request (E-Series function)
  • Relay-Control: Up to 4 relays can be switched which can control pumps, injections, etc.
  • Compensating scaled maps for N54 Engines (Boost > 1.5 Bar)
  • Switching the language and units (English, German, Italian, French, Dutch (on request further), units such as Bar-PSI, PS-KW, Lambda-AFR, ° C- ° F, etc ...)
  • Save the last 4 times (for all time measurements)
  • Up to 4 freely selectable parameters to display in a diagram
  • Freely selectable values displayed as value and bar graph (Up to 3)
  • Continuous development of functions and style
  • Exhaust flap control via MFL buttons (Steering wheel buttons)